Ortal 75 Stand Alone (Signature Burner), front facing
Ortal 75 Stand Alone (Signature Burner), three sided

Ortal 75 Stand Alone (Signature Burner)


Configuration

The Ortal 75 Stand Alone is a freestanding gas fireplace that needs no wall framing, just a gas line and a vent. It comes front facing or three sided, each a finished steel cabinet with the fire inside. Ortal's Signature burner is a long ribbon of flame rising from a bed of glass, pebbles or logs, which is the contemporary look most people picture when they think of a linear gas fireplace. It runs on natural gas or propane.

Freestanding does not mean portable. It is a direct vent appliance that gets piped and vented like any other Ortal, and clearances to the wall behind and the floor below come from the manual. It is one of the simpler Ortal installs because there is no wall cavity to build. Ortal's decorative base is a separate option on this model.

What Makes the 75 Stand Alone Different

  • Signature burner. A ribbon of flame over logs, pebbles or glass.
  • Front facing or three sided. Pick the one that suits where it sits in the room.
  • No framing. A finished cabinet instead of a wall cavity, so less construction.

Key Specifications

  • Natural gas input: up to 29,100 BTU/hr (77.8% efficiency, Ortal rating)
  • Propane input: up to 28,118 BTU/hr (73.9% efficiency, Ortal rating)
  • Venting: 4 in x 6 in coaxial direct vent
  • Interior panels: Black reflective glass or standard matte
  • Fire bed: Logs, pebbles or glass
  • Controls: Remote and wall switch (front facing); remote, Wi-Fi app and wall switch (three sided)
  • Weight: 172 lb (front facing)

Input and efficiency figures are Ortal's published ratings. How much warmth you feel depends on the room, the configuration, the venting and how the fireplace is set up.

Ortal fireplaces are built to order, so the configuration, heat barrier, interior and fire bed all get chosen before it ships. We measure the space, plan the vent run, confirm the clearances against the Ortal installation manual, and handle the install and the service afterward. Compare the rest of the Ortal line or visit our Auburn, Brunswick and Yarmouth showrooms to see the burners side by side.

Start a Project With Ortal 75 Stand Alone (Signature Burner)

Interested in this product? Tell us about the home and project. We'll review fit, venting, installation and the next step.

Photos help, but don't hold up the form. Send the project first. Our team can tell you which photos or measurements will be most useful for the next step.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed