Ortal 31 (Signature Burner), front facing
Ortal 31 (Signature Burner), see-through (tunnel)
Ortal 31 (Signature Burner), indoor-outdoor tunnel

Ortal 31 (Signature Burner)


Configuration
Barrier

The Ortal 31 is a compact direct vent gas fireplace. Ortal also lists this one as the 75 x 65, its metric body size. Ortal's Signature burner is a long ribbon of flame rising from a bed of glass, pebbles or logs, which is the contemporary look most people picture when they think of a linear gas fireplace. It runs on natural gas or propane.

You can order it front facing, as a see-through between two rooms or as an indoor-outdoor see-through with one side facing a covered porch or patio. The front is either Ortal's double glass heat barrier, which keeps the outer glass cool enough to touch, or a micro mesh protective screen. The see-through versions have glass on both long sides, and the indoor-outdoor version uses double glass on the outdoor face so it can sit in an exterior wall under cover.

What Makes the 31 Different

  • Signature burner. A ribbon of flame over logs, pebbles or glass.
  • Configurations. Available front facing, as a see-through between two rooms or as an indoor-outdoor see-through with one side facing a covered porch or patio.
  • Glass or screen. Double glass heat barrier or micro mesh screen, your choice.

Key Specifications

  • Viewing area: 30 5/8 in x 25 9/16 in
  • Natural gas input: up to 29,100 BTU/hr (77.8% efficiency, Ortal rating)
  • Propane input: up to 28,118 BTU/hr (73.9% efficiency, Ortal rating)
  • Venting: 4 in x 6 in coaxial direct vent
  • Heat barrier: Double glass or micro mesh protective screen
  • Fire bed: Logs, pebbles or glass
  • Controls: Remote and wall switch

Input and efficiency figures are Ortal's published ratings. How much warmth you feel depends on the room, the configuration, the venting and how the fireplace is set up.

Ortal fireplaces are built to order, so the configuration, heat barrier, interior and fire bed all get chosen before it ships. We measure the space, plan the vent run, confirm the clearances against the Ortal installation manual, and handle the install and the service afterward. Compare the rest of the Ortal line or visit our Auburn, Brunswick and Yarmouth showrooms to see the burners side by side.

Start a Project With Ortal 31 (Signature Burner)

Interested in this product? Tell us about the home and project. We'll review fit, venting, installation and the next step.

Photos help, but don't hold up the form. Send the project first. Our team can tell you which photos or measurements will be most useful for the next step.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

You may also like


Recently viewed