Napoleon Knightsbridge Direct Vent Gas Stove
The Napoleon Knightsbridge is a full-size cast iron direct vent gas stove in a metallic black finish, with a tall arched glass door and a 21 by 18.75 inch view of the fire. It is the classic stove look: cast front, cast top, and cast legs, all part of the stove, with a glass door, a log set, and the safety barrier in the box. There is no door or base to choose; the stove arrives complete apart from venting.
It vents out the top or the rear with 4 inch exhaust and 7 inch intake pipe, and the collars, cover plates, and the rear vent orifice all ship with the stove. A rear vent install also needs the optional trivet, which is sold separately. A blower is optional, and the stove can be set up for natural draft venting with an adapter kit. It comes in natural gas, and a propane conversion kit is available.
What Makes the Knightsbridge Different
- Real cast iron. The front, top, sides, and legs are castings, and the glass door is part of the stove rather than an add-on.
- Top or rear vent. Collars and the rear vent orifice come with the stove, so either exit is on the table at install.
- Logs and door included. The log set, the glass door, and the safety barrier are in the box.
- Blower is your call. Add the GS-64KT blower kit if you want air moving, or run it without.
This listing is the current Napoleon Knightsbridge (model GDS60-1NSB) in metallic black and natural gas. The vent termination kit is sold separately, the GS831K trivet is required for a rear vent install and sold separately, and the blower, sandstone brick panels, and andirons are optional.
Key Specifications
- Model: GDS60-1NSB (natural gas; a propane conversion kit is available)
- Input, natural gas (max): 35,000 BTU/hr top vent; a rear vent that runs straight out with no vertical rise is set to 21,000 BTU/hr with the supplied orifice
- Venting: Direct vent, top or rear exit, 4 in exhaust / 7 in intake; natural draft possible with the GS-150KT adapter kit
- Width x depth: 27 in W x 19.5 in D
- Viewing area: 21 in x 18.75 in
- Included: Log set, glass door, cast top, front, and legs, safety barrier, top and rear vent collars with cover plates, rear vent orifice, flex gas connector with shut-off valve
- Required, sold separately: Vent termination kit; GS831K trivet for a rear vent install
- Optional: GS-64KT blower kit, sandstone brick panels, remote control, andirons
- Electrical: 120 V grounded outlet
Input figures are Napoleon's ratings. How warm the room feels depends on the space, your home's layout, the installation, and how you run the fire.
Ownership & Maintenance
The safety barrier comes with the stove and must be installed. The battery holder takes 4 AA batteries that are not supplied. The stove can sit on a wood floor, but on carpet or vinyl it needs a metal or wood panel under it. We offer ongoing service for our customers.
We'll help you decide on top or rear venting and whether you want the blower, then plan the venting and installation. See more gas stoves or stop by our Auburn, Brunswick, and Yarmouth showrooms.