Valor GE4 electric fireplace insert with birch logs
Valor GE4 electric insert with clean install kit and birch logs
Valor GE4 electric fireplace insert with driftwood logs
Valor GE4 electric fireplace insert with splitwood logs
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert
Valor GE4 Electric Fireplace Insert

Valor GE4 Electric Fireplace Insert


The Valor GE4 is a larger electric insert that works whether you're upgrading an existing fireplace or starting a new build. It's 33 inches wide, runs at 120 V with a plug-in cord, and uses Valor-designed birch, driftwood, or splitwood log sets for a realistic fire.

Run it from the onboard controls, the thermostatic remote with a timer, or the C&J Smart App. There are two crackle sound options with five volume levels. At 120 V it puts out 1,400 watts, or 2,800 watts when hardwired for 240 V. For a clean finish, Valor offers the GE4CIK clean installation kit, which needs no backing plate.

What Makes the GE4 Different

  • Three ways to control it. Onboard engine controls, a thermostatic remote with timer, and the C&J Smart App.
  • Two electrical options. 1,400 W on a standard 120 V plug, or 2,800 W when hardwired for 240 V.
  • Clean install option. The GE4CIK clean installation kit gives a simple finished look without a backing plate.
  • Sound you can tune. Two crackle sound options and five volume levels, or turn it off.

This listing is the Valor GE4 electric fireplace insert engine with glass. The log set and front (or clean installation kit) are ordered separately.

Key Specifications

  • Heat output: 1,400 W at 120 V (4,700 BTU/hr) or 2,800 W at 240 V (9,400 BTU/hr)
  • Electrical: 120 V plug-in with 6 ft cord and 3-prong plug; 240 V must be hardwired; 60 Hz
  • Engine width: 33 in
  • Engine depth: 15 in
  • Controls: Onboard controls; thermostatic remote with timer; C&J Smart App
  • Sound: 2 crackle options, 5 volume levels
  • Log sets: Birch, driftwood, or splitwood (sold separately)
  • Front options: GE4CIK clean installation kit (no backing plate required) or trim fronts, sold separately

The wattage and BTU ratings are Valor's. The warmth you feel depends on the room, where the insert sits, and how it's used.

Ownership & Maintenance

No gas line or venting is involved. If you want the 2,800 W setting at 240 V, the GE4 has to be hardwired by an electrician. We offer ongoing service for our customers.

Measure your fireplace opening and stop by our Auburn, Brunswick, and Yarmouth showrooms. We'll check the fit, go over front options, and plan the electrical. Or compare more electric fireplaces.

Start a Project With Valor GE4 Electric Fireplace Insert

Interested in this product? Tell us about the home and project. We'll review fit, venting, installation and the next step.

Photos help, but don't hold up the form. Send the project first. Our team can tell you which photos or measurements will be most useful for the next step.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.


Recently viewed